TRA 3-2413

DC/DC Converter TRA 3 Series, 3 Watt • • Semi-regulated output (load) • • • • Industry standard pinout • 3-year product warranty Highest power density 3W SIP-Converter High efficiency up to 89% I/O isolation voltage 1000 VDC Operating temperature range –40°C to +95°C UL 62368-1 IEC 62368-1 The TRA 3 series are miniature, I/O-isolated 3W DC/DC-converters with a semi load regulation. They are the ideal solution to power drivers and circuits where unregulated DC/DC converters do not meet the input voltage range at load change Models Order Code Input Voltage Output Voltage Output Current Efficiency Range nom. max. typ. 5 VDC 600 mA 83 % TRA 3-0511 9 VDC 333 mA 87 % 12 VDC 250 mA 86 % TRA 3-0513 15 VDC 200 mA 88 % TRA 3-1211 5 VDC 600 mA 84 % TRA 3-0519 TRA 3-0512 4.5 - 5.5 VDC (5 VDC nom.) 9 VDC 333 mA 88 % 12 VDC 250 mA 88 % TRA 3-1213 15 VDC 200 mA 89 % TRA 3-2411 5 VDC 600 mA 82 % TRA 3-1219 TRA 3-1212 TRA 3-2419 TRA 3-2412 TRA 3-2413 www.tracopower.com 10.8 - 13.2 VDC (12 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) 9 VDC 333 mA 85 % 12 VDC 250 mA 86 % 15 VDC 200 mA 85 % September 20, 2023 Page 1 / 4 TRA 3 Series, 3 Watt Input Specifications Input Current - At no load 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: - At full load Surge Voltage Recommended Input Fuse Input Filter 50 mA typ. 40 mA typ. 30 mA typ. 700 mA max. 285 mA max. 150 mA max. 9 VDC max. (1 s max.) 18 VDC max. (1 s max.) 30 VDC max. (1 s max.) 2'000 mA (slow blow) 1'000 mA (slow blow) 500 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Output Specifications Voltage Set Accuracy Regulation Ripple and Noise Capacitive Load Minimum Load - Input Variation (1% Vin step) - Load Variation - 20 MHz Bandwidth Temperature Coefficient Short Circuit Protection ±3% max. (at 80% load) 1.2% max. See application note: www.tracopower.com/overview/tra3 100 mVp-p max. 220 µF max. 2 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. Limited 0.5 s max., Automatic recovery Safety Specifications Safety Standards CSA-C22.2, No. 60950-1 EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/tra3 PD 3 Not mains connected - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance - Operating Temperature - Case Temperature - Storage Temperature - High Temperature - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC 95% max. (non condensing) –40°C to +95°C +100°C max. –50°C to +125°C 5 %/K above 85°C See application note: www.tracopower.com/overview/tra3 Natural convection (20 LFM) 6'000 m max. 60 kHz min. (PWM) Functional Insulation 1'000 VDC 1'200 VDC 1'000 MΩ min. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TRA 3 Series, 3 Watt Isolation Capacitance - Input to Output, 100 kHz, 1 V Reliability Washing Process - Calculated MTBF Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number 60 pF typ. 120 pF max. 2'000'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Non-conductive Plastic (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Nickel-Iron (Alloy 42) Nickel (1 µm min.) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) SIP7 Lead-Free Wave Soldering 260°C / 10 s max. 2.2 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 482311f2-60f6-4845-a3ce-39ba02ae88f0 Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tra3 All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TRA 3 Series, 3 Watt Outline Dimensions 0.5 (0.20) (0.02) (0.04) 3.2 5.08 (0.20) (0.13) 5.08 1.3 2.1 2.54 (0.08) (0.10) (0.05) 0.5 (0.02) 10.2 Pinout Pin Function 1 +Vin (Vcc) 2 –Vin (GND) 4 –Vout 6 +Vout 19.5 bottom view 4 6 0.5 (0.02) (0.01) 2 0.25 1 (0.30) 7.62 (0.77) Dimensions in mm (inch) Tolerance: x.x ±0.25 (x.xx ±0.01) x.xx ±0.13 (x.xxx ±0.005) Pins: ±0.05 (±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4